Hardwood refinishing
Screen and recoat for tired finish, full sanding for scratches and wear, and stain changes tested on your own floor before we commit.
Halton Region
Oakville has three heritage districts by the lake, a 1980s golf-course community in Glen Abbey and newer estate streets in Joshua Creek, and each asks something different of its floors.
Oakville was protecting its old houses earlier than most of Ontario. Old Oakville, south of Robinson Street between Sixteen Mile Creek and Allan Street, became the town’s first heritage conservation district in 1981. First and Second Street followed in 1987, and Trafalgar Road in 1994. Bronte, to the west, has its own history going back to an 1834 village by the harbour.
Not every Oakville floor is that old, of course. Here is what we look for, depending on where you live.
Have a quick look at these and you will save time at the measure:
Houses in the three lake-area districts were built in waves, from about 1850 to 1900 and again from 1900 to 1930 in the First and Second Street area. Floors in these homes often have decades of patching, and boards may have been face-nailed or replaced room by room.
We start with repair where boards are split or loose, then refinish so the old and new wood read as one. Dust walls on every doorway and a vacuumed site at the end of each day matter more in a house full of original trim.
Most of Glen Abbey was built during a 1980s boom around the golf course, with building continuing into the 1990s. If your house still has its original solid hardwood, it may be in good shape under the scuffs. Sanding back to bare wood, choosing a tone from test patches and applying fresh coats of finish can make it look current. If you want a different look altogether, engineered hardwood in a wider plank is the common upgrade.
Joshua Creek started in the 1990s, with a second phase from 2004, and is mostly single-detached homes. Where a larger home has an open main floor, the staircase tends to be the focal point. Our staircase service explains how open and curved flights are templated, capped or rebuilt.
We do not publish one price for Oakville because these jobs vary so much. Read refinish or replace to see which way your floor leans, then book a free measure for an itemized written quote with fixed dates.
The Old Oakville, First and Second Street, and Trafalgar Road districts hold 19th and early 20th century homes. Wide old boards, repairs from past renovations and floors that slope with the house are the norm.
Two-storeys from Glen Abbey's main 1980s building boom and the decade after. Where original hardwood remains it is often sound but dull, and carpet on stairs and upper floors is due for replacement.
Mostly single-detached homes from the late 1990s onward. Where main floors are open and the staircase is on show, upgrades usually mean wider planks and stair conversions.
Solid hardwood from the 1980s, where a house still has it, is often thick enough for a full sand and new finish. Changing the colour this way costs far less than tearing it out.
Large windows and south light can change how a stain reads. We put samples on your floor and you choose in daylight, not under work lights.
If your staircase is open on one side or curves, treads are templated individually and nosings are returned at the open end.
Wide boards move more with the seasons. In large open rooms we lean toward engineered planks and confirm acclimation with moisture readings.
Screen and recoat for tired finish, full sanding for scratches and wear, and stain changes tested on your own floor before we commit.
Refinished, capped or rebuilt stairs that match the floors at the top and bottom, priced per step so you can see the total before we start.
A real wood surface on a stable layered core, installed floating, glued or nailed depending on what is underneath, for condos, basements and houses alike.
Targeted repairs for damaged, squeaky or patched hardwood, with new boards woven in and colour matched so the fix does not show.
Solid oak, maple and walnut nailed down over a sound wood subfloor, with moisture readings on record and start and finish dates written on your quote.
At the free measure [CONFIRM] we check board thickness, how worn the finish is and whether there is deep pet or water damage, then tell you plainly whether a full sand will work.
Often, yes, though red oak has a warm undertone that limits how grey it can go. We sand a test area and apply samples so you see the real result on your own floor.
Yes. Curved and open stairs are measured tread by tread and quoted per step. The finish is matched to your main floor.
Yes. We are careful with original boards and test before sanding, because older floors may have been refinished several times already.
We reply within one business day [CONFIRM] to book a free in-home measure. Your quote is written and itemized: materials, labour, prep, removal and disposal, so there are no surprises later.
Tell us about your floors. We will book a visit, measure, and send a quote that lists every cost up front.